These cable and wire support j-hooks are attachable to ceilings, walls, concrete or flanges.
J-Hooks for Cable & Wire Support
With a variety of over 60 j-hook combinations, our specially designed j-hooks suit most cable management requirements.
Our industry quality j hooks provide support to cables for trades including:
low voltage electrical
CAT5 & 6 (computer networking)
fire protection cabling
distribution pathway systems
... as well as many others.
Our j-hooks are also generally referred to as Cable Hooks or Cable Holders; since they are most often attached to the ceiling and specifically designed to run sensitive cable installations.
Which J-Hooks are right for you?
have in effect 7 j-hooks which can be in turn combined with 11
different attachments depending on where the j hooks need to go. Then we
have brackets which combine j-hooks, in effect making a 'double' j-hook,
typically known as u-hooks. You can fit up to 200 cat 5 cables and
they can hold a weight up to 50 lbs.
The standard j-hooks are a
galvanized steel finished with yellow zinc chromate. They come in the
following sizes: 3/4", 1 5/16", 2" and 4".
The plastic and metal
composite j-hooks are galvanized steel & polypropylene composite
which incorporates the best features of both metal and plastic,
providing strength and a slick, no-bur surface. This j-hook includes a
latch to which the built-in bendable flap can be locked into thus
securing the cables. They come in the following sizes: 1", 2" and 3".
The standard j-hook has a number of attachments which are all designed for varying circumstances. From simply having your j hooks attached to a wall, to ceilings, into concrete using powder actuated tools, different size flanges, threaded rod, ceiling wire etc.
Our Standard J-Hook attachments come as follows:
90 Degree Angle Clip
The Angle Clip comes in useful when a flush (wall) mount does not work out and the j hook needs to be attached straight to the ceiling. There is are two Angle Clips available - one for all sizes with a 1/4" holeand one for the 2 bigger j-hooks of which the hole of the clip is designed to work with 3/8" threaded rod.
90 Degree Angle clip with powder actuated pin
Similar in function to the above angle clip but it comes complete with a pin ready to be shot in using a powder actuated tool to go directly into concrete.
Batwing Clip - Multi-purpose spring steel bat wing clips allow you to attach a j-hook to to ceiling wire as thin as 12 gauge and threaded rod up to 1/4Ē.
This clamp is specially designed to hold j hooks onto metal beam Flanges that are 1/8Ē Ė 1/4 Thick and there is another size available for flanges 5/16" - 1/2" thick. They are made of high quality spring steel.
This is basically the Knock-On Clamp as above but included in it are two 90 degree angle clips that allow the j hook to be clamped to the metal beam but gives it the capability of completely rotating as well.
Screw-in press beam clamp
This design is also for metal beam flanges but this design has a screw-in function so the j-hook's beam clamp is tightened to the flange by a bolt.
Screw-in press beam clamp that rotates 360 degrees
This is basically the press beam clamp as above but included in it is the 90 degree angle clip which allows the j-hook to be clamped to the metal beam but gives it the capability of completely rotating as well.
This eye coupling j hook attachment screws into 1/4" 20 threaded rod.
Plastic and Metal Composit J-Hooks
Aptly named 'Cable Cage Hooks' and touched upon already above, these j hooks are made of metal and plastic. Their combinations of attachments are identical to the standard j-hook, but are typically only prepared in two combinations. For further combinations, please contact us so your order can be customized.
These J-Hooks come prepared with the following attachments:
90 Degree Angle Clip
The Angle Clip comes in useful when a flush (wall) mount does not work out and the Jhook needs to be attached straight to the ceiling.
Bat Wing Clip
Multi-purpose spring steel bat wing clips allow you to attach a j hook to ceiling wire as thin as 12 gauge and threaded rod up to 1/4Ē.
Competing Brands that make J-Hooks:
While we would like to say our j-hooks are better and cheaper than our well established competing brands, We recommend you try them for yourself and see which works best for you.
Hook and Hanger have engineered their J-Hooks with a wider array of options than the B-Line J-Hook and are selling them at a fraction of the cost.
The Panduit j hook range is well designed and typically made of hardened plastic.
Clearly the industry leader, the Caddy J-Hook range compared to ours except for the price.