|
J-Hook - Multi-Purpose and Cable Support- 3/4" - UL Listed
|
|
J-Hook - Multi-Purpose and Cable Support - 1 5/16" - UL Listed
|
|
J-Hook - Multi-Purpose and Cable Support - 2" - UL Listed
|
|
J-Hook - Multi-Purpose and Cable Support- 4" - UL Listed
|
|
|
|
|
|
|
|
|
|
Product Code: JH12
Use our UL Listed J-Hooks to organize and support your cables as well as telecom wires above suspended ceilings and in crawl spaces.
|
Product Code: JH21
The JH21 UL Listed J-Hook can hold up to 50 cat5 cables; designed as cable support for all low voltage cable runs.
|
Product Code: JH32
Use our UL Listed J-Hooks to organize and support your cables as well as telecom wires above suspended ceilings and in crawl spaces.
|
Product Code: JH64
The largest of our J-Hooks; UL listed and able to hold up to 300 cat5e cables (as well as all low voltage cables).
|
|
|
|
Angle Clip with Eye Coupling and Powder Actuated Pin for Concrete
|
|
Angle Clip with Eye Coupling
|
|
Fast Rod Z Clip for 1/4" x 20 Threaded Rod
|
|
I-Lag Screw (Eye Lag Screw) for Use in Wood
|
|
|
|
|
|
|
|
|
|
Product Code: FR-ACP
90° Angle clip with 1/4" x 20 threaded female eye coupling and Bluepoint powder actuated pin for concrete.
|
Product Code: FR-AC
90° Angle clip with 1/4" x 20 female threaded eye coupling. Use to hang threaded rod.
|
Product Code: FR-ZC
Fast rod “Z” shaped clip for fastening 1/4" x 20 threaded rod to ceilings.
|
Product Code: W300C
The W300C is a sharp point I-LAG™ screw (Eye Lag Screw) that is designed for use in wood.
|
|
|
|
Knock-On Beam Clamp for Flanges 1/8 - 1/4" Thick
|
|
Bat Wing Clip for Threaded Rod & Ceiling Wire
|
|
Screw-on Beam Clamp for Flanges Up to 1/2" Thick
|
|
Knock-On Beam Clamp for Flanges 5/16 - 1/2" Thick
|
|
|
|
|
|
|
|
|
|
Product Code: HOK-24
Knock-On Spring Steel Beam Clamp for Flanges 1/8” – 1/4 Thick
|
Product Code: Bat Wing
The Bat Wing Clip conveniently and securely attaches itself to ceiling wire and threaded rod in order for J-Hooks can easily hang of these.
|
Product Code: PBC
Zinc plated steel pressed beam clamp for flanges up to 1/2" thick such as I-beams.
|
Product Code: HOK-58
Knock-On Spring Steel Beam Clamp for Flanges 5/16” – 1/2” Thick
|
|
|
|
Plastic and Metal Composite Cable Support J-Hook - 1"
|
|
Plastic - Metal Cable Support J-Hook with Bat Wing Clip - 1"
|
|
Plastic - Metal Composite Cable Support J-Hook with Bat Wing Clip - 2"
|
|
Plastic - Metal Composite Cable Support J-Hook - 3"
|
|
|
|
|
|
|
|
|
|
Product Code: CCP16
The 1” metal and plastic cable cage low voltage cable support J-Hook can hold up to 20 4-Pair of UTP CAT 5e or 2-strand fiber optic cables; or up to 15 CAT 6 cables.
|
Product Code: CCP16W
The 1” Plastic and Metal J-Hook can hold up to 20 4-Pair of UTP CAT 5e or 2-strand fiber optic cables; or up to 15 CAT 6 cables.
|
Product Code: CCP32W
2" Plastic and Metal Composite Wide Base J-Hook - Cable Support with Bat Wing clip
|
Product Code: CCP48
The 3” CCP J-Hook can hold up to 200 4-Pair of UTP CAT 5e, 2-strand fiber optic cables; or up to 150 CAT 6 cables.
|
|
|
|
Plastic - Metal Composite Cable Support J-Hook with Bat Wing Clip - 3"
|
|
Plastic - Metal Composite Cable Support J-Hook - 2"
|
|
Plastic - Metal Composite Cable Support J-Hook with 90 degree angle clip - 1"
|
|
Plastic - Metal Composite Cable Support J-Hook with 90 Degree angle clip - 2"
|
|
|
|
|
|
|
|
|
|
Product Code: CCP48W
The 3” CCP J-Hook can hold up to 200 4-Pair of UTP CAT 5e or 2-strand fiber optic cables; or up to 150 CAT 6 cables.
|
Product Code: CCP32
The 2” CCP J-Hook is designed to hold up to 90 4-Pair of UTP CAT 5e, 2-strand fiber optic cables; or up to 60 CAT 6 cables.
|
Product Code: CCP16AC
The 1” Plastic and Metal J-Hook with an Angle Clip attachment; ideal for fastening to ceilings and beams. Can hold up to 20 4-Pairs of CAT 5e cable.
|
Product Code: CCP32AC
The 2” CCP J-Hook can hold up to 90 4-Pair of UTP CAT 5e or 2-strand fiber optic cables; or up to 60 CAT 6 cables.
|
|
|
|
Plastic - Metal Composite Cable Support J-Hook with 90 Degree angle clip - 3"
|
|
Fast Rod Z Clip with 1" Pin for Concrete for 1/4" x 20 Threaded Rod
|
|
Lagmaster Plus Extension Pole- Double x 3' for Ceilings up to 11'
|
|
Lagmaster Plus Extension Pole - Double x 6' for Ceilings up to 18'
|
|
|
|
|
|
|
|
|
|
Product Code: CCP48AC
The 3” CCP J-Hook can hold up to 200 4-Pair of UTP CAT 5e or 2-strand fiber optic cables; or up to 150 CAT 6 cables.
|
Product Code: FR-ZCP
Fast rod “Z” shaped clip for fastening 1/4" x 20 threaded rod to ceilings. Consists of two legs, one is staked with a 1” Bluepoint pin for fastening the clip to concrete - 50 per box.
|
Product Code: LMP-6
The Lagmaster™ Plus is the ultimate all-in-one pole tool. The unique interchangeable plug-in heads make it the most efficient and effective tool of its kind.
|
Product Code: LMP-12
The Lagmaster™ Plus is the ultimate all-in-one pole tool. The unique interchangeable plug-in heads make it the most efficient and effective tool of its kind.
|
|
|
|
Lagmaster Plus Extension Pole - Triple x 6' for Ceilings up to 24'
|
|
Lagmaster Plus Extension Pole - Triple x 8' for Ceilings up to 30'
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 6'
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 8'
|
|
|
|
|
|
|
|
|
|
Product Code: LMP-18
The Lagmaster™ Plus is the ultimate all-in-one pole tool. The unique interchangeable plug-in heads make it the most efficient and effective tool of its kind.
|
Product Code: LMP-24
The Lagmaster™ Plus is the ultimate all-in-one pole tool. The unique interchangeable plug-in heads make it the most efficient and effective tool of its kind.
|
Product Code: LS-6-350
The Long Shooter extends the reach of your powder actuated tool. Specially designed to work with Hilti’s™ DX350 & DX35.
|
Product Code: LS-8-350
The Long Shooter extends the reach of your powder actuated tool. Specially designed to work with Hilti’s™ DX350 & DX35. Ramset’s™ Cobra.
|
|
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 6'
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 8'
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 6'
|
|
Dielectric Fibreglass Extension Pole for PAT (E150, T3) - 8'
|
|
|
|
|
|
|
|
|
|
Product Code: LS-6-3660
The Long Shooter extends the reach of your powder actuated tool. Specially designed to work with Hilti’s™ DX36M.
|
Product Code: LS-8-3660
Specially designed to work with Hilti’s™ DX36M. Ramset’s™ D60, D45 & SA270. It also works with some pistol grip power drills.
|
Product Code: LS-6-T3
The Long Shooter extends the reach of your powder actuated tool. Specially designed to work with Ramset’s™ E150 & T-3.
|
Product Code: LS-8-T3
The Long Shooter extends the reach of your powder actuated tool. Specially designed to work with Ramset’s™ E-150 & T-3.
|
|
|
|
Cable Ties - Nylon - 6"
|
|
Cable Ties - Nylon - 11"
|
|
Z Purlin Clips
|
|
Angle Clip - 2 Hole
|
|
|
|
|
|
|
|
|
|
Product Code: CT6
6” Generic nylon cable tie, natural nylon color. Sold in bags of 100.
|
Product Code: CT11
11” Generic nylon cable tie, natural nylon color, sold in bags of 100.
|
Product Code: ADOC14
The Z purlin clip - clamps to diagonal beam flanges so ceiling wire, jack chain or j-hooks can be conveniently, easily and securely attached. The Spring Steel Z-Purlin Clip is designed for Angled Flanges 1/8” – 1/4" Thick.
|
Product Code: HOCL-1
Doc’s 90 Degree 12 Gauge Angle Clip.
|
|
|
|
C-Purlin Clip for Vertical Flanges 1/8 - 1/4" Thick
|
|
J-Hook with Bat Wing Clip for Threaded rod & Ceiling Wire - 3/4" - UL Listed
|
|
Cable Support J-Hook with Large Knock-on Beam Clamp - 3/4"
|
|
Cable Support J-Hook with Screw-on Press Beam Clamp - 3/4"
|
|
|
|
|
|
|
|
|
|
Product Code: VOH14
Spring Steel C-Purlin Clip for Vertical Flanges 1/8” – 1/4" Thick
|
Product Code: JH-12W
¾” Doc’s J-Hooks with bat wing clip (UL Listed) can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-12HOK58
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-12PBC
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Rotating Screw-On Press Beam Clamp - 3/4"
|
|
Cable Support J-Hook with Powder Actuated Pin for Attachment to Concrete - 3/4"
|
|
Cable Support J-Hook with Eye Coupling for Threaded Rod - 3/4"
|
|
Cable Support J-Hook with Knock-on Rotating Beam Clamp - 3/4"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-12ACPBC
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-12ACPA
3/4" Doc’s J-Hooks can hold up to16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-12EH
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-12ACHOK24
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Large Knock-on Rotating Beam Clamp - 3/4"
|
|
Eye Lag Screw (I-Lag Screw) for 16-22 Gauge Sheet Metal
|
|
Retro Kit - 6 Piece. Converts Standard Lagmaster Pole to Lagmaster Plus
|
|
Cable Support J-Hook with Large Knock-on Beam Clamp - 1-5/16"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-12ACHOK58
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: 200SDH
The self drilling I-lag (Eye Lag) screw for sheet metal is used to hang ceiling wire and jack chain quickly and is designed to go directly into 16 to 22 gauge sheet metal..
|
Product Code: LMP Retro Kit
The LMP’s unique all-in-one patented plug-in system allows you to install multiple types of fasteners to a variety of ceiling structures.
|
Product Code: JH-21HOK58
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with 90 Degree Angle Clip - 3/4" - UL Listed
|
|
Cable Support J-Hook with 90 Degree Angle Clip - 1-5/16" - UL Listed
|
|
Cable Support J-Hook with 90 Degree angle clip - 2" - UL Listed
|
|
Cable Support J-Hook with 90 Degree Angle Clip - 4" - UL Listed
|
|
|
|
|
|
|
|
|
|
Product Code: JH-12AC
¾” Doc’s J-Hooks with 90 Degree Angle Clips (UL Listed) can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-21AC
1-5/16” Doc’s J-Hooks with 90 Degree Angle Clips (UL Listed) can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32AC
2” Doc’s J-Hooks with 90 Degree Angle Clips (UL Listed) can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64AC
4” Doc’s J-Hooks with 90 Degree Angle Clips (UL Listed) can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Rotating Knock-on Beam Clamp - 4"
|
|
J-Hook with Bat Wing Clip for Threaded rod & Ceiling Wire - 1-5/16" - UL Listed
|
|
J-Hook with Bat Wing Clip for Threaded Rod & Ceiling Wire - 2" - UL Listed
|
|
J-Hook with Bat Wing Clip for Threaded Rod & Ceiling Wire - 4" - UL Listed
|
|
|
|
|
|
|
|
|
|
Product Code: JH-64ACHOK24
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: JH-21W
1-5/16” Doc’s J-Hooks with Bat Wing Clips (UL Listed) can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32W
2” Doc’s J-Hooks with Bat Wing Clips (UL Listed) can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64W
4" Doc’s J-Hooks with Bat Wing Clips (UL Listed) can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Large Knock-on Beam Clamp - 2"
|
|
Cable Support J-Hook with Large Knock-on Beam Clamp - 4"
|
|
Cable Support J-Hook with Screw-on Press Beam Clamp - 1-5/16"
|
|
Cable Support J-Hook with Screw-on Press Beam Clamp - 2"
|
|
|
|
|
|
|
|
|
|
|
Product Code: JH-32HOK58
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64HOK58
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: JH-21PBC
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32PBC
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Screw-on Press Beam Clamp - 4"
|
|
Cable Support J-Hook with Rotating Screw-In Press Beam Clamp - 1-5/16"
|
|
Cable Support J-Hook with Rotating Screw-In Press Beam Clamp- 2"
|
|
Cable Support J-Hook with Rotating Screw-In Press Beam Clamp - 4"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-64PBC
4" Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: JH-21ACPBC
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32ACPBC
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64ACPBC
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Powder Actuated Pin for Attachment to Concrete - 1-5/16"
|
|
Cable Support J-Hook with Powder Actuated Pin for Attachment to Concrete - 2"
|
|
Cable Support J-Hook with Eye Coupling for Threaded Rod - 1-5/16"
|
|
Cable Support J-Hook with Eye Coupling for Threaded Rod - 2"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-21ACPA
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32ACPA
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-21EH
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables
|
Product Code: JH-32EH
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Eye Coupling for Threaded Rod - 4"
|
|
Cable Support J-Hook with 90 Degree Large Angle Clip - 2"
|
|
Cable Support J-Hook with 90 Degree Large Angle Clip - 4"
|
|
Cable Support J-Hook with Rotating Knock-on Beam Clamp - 1-5/16"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-64EH
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: JH-32AC6
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64AC6
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: JH-21ACHOK24
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Rotating Knock-on Beam Clamp- 2"
|
|
Cable Support J-Hook with Rotating Large Knock-on Beam Clamp- 1-5/16"
|
|
Cable Support J-Hook with Rotating Large Knock-on Beam Clamp - 2"
|
|
Cable Support J-Hook with Rotating Large Knock-on Beam Clamp - 4"
|
|
|
|
|
|
|
|
|
|
Product Code: JH-32ACHOK24
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-21ACHOK58
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
Product Code: JH-32ACHOK58
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64ACHOK58
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
|
|
|
Lagmaster Plus Extension Pole - Triple x 4' for Ceilings up to 18'
|
|
Velcro One-Wrap Strap - 1/2" x 75 ft. Roll - Fire Retardant
|
|
Velcro One-Wrap Strap - 3/4" x 75 ft. Roll - Black
|
|
Velcro One-Wrap Strap - 1/2" x 75 ft. Roll
|
|
|
|
|
|
|
|
|
|
Product Code: LMGP-12
The Lagmaster™ Plus is the ultimate all-in-one pole tool. The unique interchangeable plug-in heads make it the most efficient and effective tool of its kind.
|
Product Code: 151505
Plenum Rated Velcro® One-Wrap® Strap - 1/2" x 75 ft. Roll - Cranberry Color
|
Product Code: 189645
Velcro® One-Wrap® Strap - 3/4" x 75 ft. Roll - Black
|
Product Code: 189755
Velcro® Brand One-Wrap® Strap – 1/2" x 75 ft. Roll - Black
|
|
|
|
Screw Mounts for Cable Ties - Large
|
|
Screw Mounts for Cable Ties - Small
|
|
Double J-Hook Spacer for J-Hooks Sizes JH12, JH21 & JH32
|
|
Double J-Hook Spacer for J-Hooks Size JH64
|
|
|
|
|
|
|
|
|
|
Product Code: CML
Nylon Screw Mounts for Cable Ties - Large. Large size is 20 x 15 x 10 millimeters. Natural nylon color.
|
Product Code: CMS
Nylon screw mounts for cable ties. Small size is 15 x 9 x 6 millimeters. Natural nylon color.
|
Product Code: DS32
Double J-Hook Spacer bracket for Sizes JH12, JH21 & JH32
|
Product Code: DS64
Double Hook Spacer for Large J-Hook (JH64)
|
|
|
|
Cable Ties - Thomas & Betts Catamount - 7"
|
|
Cable Ties - Thomas & Betts Catamount - 11"
|
|
Cable Ties - Thomas & Betts Catamount - 14"
|
|
Cable Support J-Hook with Knock-on Beam Clamp - 1-5/16"
|
|
|
|
|
|
|
|
|
|
Product Code: L-7-50-9-M
Thomas & Betts Catamount® cable ties, natural nylon color, tensile strength rating is 50lbs., actual length is 7.5”.
|
Product Code: L-11-50-9-D
Thomas & Betts Catamount® cable ties, natural nylon color, tensile strength rating is 50lbs., actual length is 11.1”.
|
Product Code: L-14-50-9-D
Thomas & Betts Catamount® cable ties, natural nylon color, tensile strength rating is 50lbs., actual length is 14.1”.
|
Product Code: JH-21HOK24
1-5/16” Doc’s J-Hooks can hold up to 50 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 32 CAT 6 cables.
|
|
|
|
Cable Support J-Hook with Knock-on Beam Clamp - 3/4"
|
|
Cable Support J-Hook with Knock-on Beam Clamp - 2"
|
|
Cable Support J-Hook with Knock-on Beam Clamp - 4"
|
|
QuickStrike Heavy Duty Push-Pull Rod
|
|
|
|
|
|
|
|
|
|
Product Code: JH-12HOK24
¾” Doc’s J-Hooks can hold up to 16 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 10 CAT 6 cables.
|
Product Code: JH-32HOK24
2” Doc’s J-Hooks can hold up to 80 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 50 CAT 6 cables.
|
Product Code: JH-64HOK24
4” Doc’s J-Hooks can hold up to 300 4-Pair UTP CAT 5e or 2-strand fiber optic cables; or up to 185 CAT 6 cables.
|
Product Code: QUICKSTRIKE
The QuicStrike is a new heavy duty triple telescoping push/pull rod.
|
|
|
|
Purlin Clip Installation Tool
|
|
Halt Bit - 3/8" x 3.75"
|
|
Halt Bit - 1/4" x 1.25"
|
|
Bridle Ring 10x24 - (3/4")
|
|
|
|
|
|
|
|
|
|
Product Code: HOIT-AL
The HOIT-AL is an installation tool for Z and C Purlin Clips. It can be attached to a number of extension poles.
|
Product Code: ODM375
Specifically design for 3/8" wedge anchors up to 4".
|
Product Code: ODM250
Specifically designed for 1/4" eye wedge anchor.
|
Product Code: BR2T075
Low cost solution for data comm and other low voltage cable support
|
|
|
|
Bridle Ring 10x24 - 2"
|
|
Bridle Ring 1/4"x20 - 1 1/4"
|
|
Bridle Ring 1/4"x20 - 2"
|
|
Bridle Ring 1/4"x20 - 4"
|
|
|
|
|
|
|
|
|
|
Product Code: BR2T200
Low cost solution for data comm and other low voltage cable support
|
Product Code: BR4T125
Low cost solution for data comm and other low voltage cable support
|
Product Code: BR4T200
Low cost solution for data comm and other low voltage cable support
|
Product Code: BR4T400
Low cost solution for data comm and other low voltage cable support
|
|
|
|
Quic Stic Triple 6' Telescoping Fiberglass Push/Pull Extension Pole
|
|
Overhead Drilling Machine ODM
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 6'
|
|
Fiberglass Extension Pole for Powder Actuated Tools - 8'
|
|
|
|
|
|
|
|
|
|
Product Code: Quic-Stic
The Quic Stic is a utility “lay-up” stick. It is primarily designed for the cable industry but has many other uses. The push/pull design allows you to place wires where you want them with very little effort.
|
Product Code: ODM
The ODM is the ultimate all-in-one extension tool for overhead drilling applications.
|
Product Code: LS-6-C3
The Long Shooter extends the reach of your powder actuated tool. Specifically designed to work with Powers’ C3 and Simpson’s GFC34.
|
Product Code: LS-8-C3
The Long Shooter extends the reach of your powder actuated tool. Specifically designed to work with Powers’ C3 and Simpson’s GFC34.
|
|
|
